USB insert for 2006 Subaru WRX
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An insert for female USB leads to go into one of the empty control spaces in a 2006 Subaru Impreza WRX. The gap in the…
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 63
- Makes
- 0
- Views
- 703
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
An insert for female USB leads to go into one of the empty control spaces in a 2006 Subaru Impreza WRX. The gap in the middle should be enough for two female leads to fit snugly.
This was created to set up a tidier way of containing the leads from an Atoto A6, rather than just having them hang down under the centre console.
It should fit the base Impreza as well, but I don't believe the STI has the required empty control space (you get fun stuff like diff lock controls instead).
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
Yes
Resolution:
.16mm to 23mm height, .08mm above that
Infill:
30% (probably overkill)
Filament:
Rigidink PLA
Notes:
I set the layer height to .08mm from 23mm high, just to make sure the slight curve on the top of the insert was as smooth as possible. .16mm/layer below that, so it didn't take forever.
I printed it in the orientation it is, letting Simplify3D automatically set supports.Category: Automotive