Wenko Maxiablage Milazzo Wandschutzkappe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small cap for the part of the bath tray that touches the wall. This will protect it. PLA or PETG. Both work.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a small cap that fits over the part of the Wenko bathroom accessories which touches the wall to keep distance. I created it because after some time, you will have some rusty marks on your wall, and they are hard to remove. This will protect your wall.
I made it for this Wenko Milazzo bathroom accessories model https://shop.wenko.de/bad/badhelfer/ablagen/vacuum-loc-maxiablage-milazzo-befestigen-ohne-bohren
Should work for other models as well.
Tight fit and slips on it.
Print with PLA or PETG.
I used 0.2 mm quality with 0.4 mm nozzle. 15% to 20% in fill should be more than enough.