Wenko Maxiablage Milazzo Wandschutzkappe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small cap for the part of the bath tray that touches the wall. This will protect it. PLA or PETG. Both work.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a small cap that fits over the part of the Wenko bathroom accessories which touches the wall to keep distance. I created it because after some time, you will have some rusty marks on your wall, and they are hard to remove. This will protect your wall.
I made it for this Wenko Milazzo bathroom accessories model https://shop.wenko.de/bad/badhelfer/ablagen/vacuum-loc-maxiablage-milazzo-befestigen-ohne-bohren
Should work for other models as well.
Tight fit and slips on it.
Print with PLA or PETG.
I used 0.2 mm quality with 0.4 mm nozzle. 15% to 20% in fill should be more than enough.