1 / 6
Simple flux dispenser 30cc
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple flux dispenser designed for 30cc flux syringe. It's a 4 part print that you can simply screw in after…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 60
- Makes
- 0
- Views
- 363
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a simple flux dispenser designed for 30cc flux syringe.
It's a 4 part print that you can simply screw in after printing.
I'd suggest printing it at 0.12mm layer height for best results but printing it at 0.2mm works just fine.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Filament: Generic PLA Blue
Notes:
Note that the top and bottom parts are the same part.
Step by step
- Screw in one side Insert the middle piece Screw in the other side
Category: Parts