1 / 3
Handles for skipping rope
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handles for skipping rope with 606 ball bearing
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 57
- Makes
- 0
- Views
- 361
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Handles for skipping rope with 606 ball bearing.
2 x 606 ball bearing required for each handle (4 in total). The outer bearing is press-fit, the inner one is loos-fit, you can pull it in using the rope itself.
Supports are required for the bearing stopper (on the inside).
SkippingRopeHandleV2 is a simplified updated version:
- a single bearing is required for each handle
- prints without supports
- no infill required (0%)
- somewhat faster to print
For best results use 4 layer wall thickness. Use a brim for better bed adhesion.
The 606 bearings have a 6mm hole, so that would be the maximal thickness of the rope.
Please share your design in case you make modifications.