BugBu 260
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The 260 uses all an ender bed, or even Bambu build plate, with a cantilever bed
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 231
- Makes
- 0
- Views
- 1,393
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The BugBu 260 has a printable area of 235x235x300 unless you slap on a Bambu build plate, then you get 260x250x300 build volume. This uses a cantilever bed to eliminate the closed loop belt system. All part are printed at 6 walls and 20% infill minimum, designed for 0.4 nozzle at 0.2 layer height. These files are made for PLA, if using ABS or ASA bump size of parts up to 100.5% to account for shrinkage of materials. With lots of testing hours, it is working well currently on the cantilever, but there will be mods coming for it to give a couple of bed operation options.