1 / 1
Ender 6 PEI Bed Guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A PEI build plate guide to make aligning the PEI sheet easier this screws into the Z axis arms.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 149
- Makes
- 3
- Views
- 1,533
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Tried to use the original that this was remixed from but as I'm using silicone spacers it sat higher than my bed. I also made sure to leave some clearance for the internal spool holder mod that I'm running.
This attaches to the arms for the Z axis rather than the cross bar.
One of them has a cut-out for the the Heated Bed cables.
I used an M3x16mm screw with a T-Nut for each one.
As it is close to the bed I'd recommend printing in ABS.
I use a 0.6mm nozzle and printed with a 0.3mm layer height.
