Popsicle stick (construction unit)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is 3D printed reincarnation of famous Popsicle construction unit.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 45
- Makes
- 0
- Views
- 417
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- GNU General Public License v3.0
This model is done in Fusion360. Its a Popsicle construction unit toy to build what you can imagine.
The print is pretty simple. I printed it on Prusa Mini+ with 0,6mm nozzle and 0,2mm layer height. I used Prusament PLA Green and Vanilla White. I advice to print more of them at same time.
The popsicle stick can be cutted to multiple pieces so you can use one stick as 5 pieces. The best place to cut is indicated by triangle openings.
The stick is 10cm long, 1cm wide and 1,8mm thick. The connections are 2mm and 4 mm wide, therefore tolerance is 0,2mm per stick.
I hope that you will enjoy this simple model and I cant wait to see different structures and designs in comments!