Popsicle stick (construction unit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is 3D printed reincarnation of famous Popsicle construction unit.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 417
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU General Public License v3.0
This model is done in Fusion360. Its a Popsicle construction unit toy to build what you can imagine.
The print is pretty simple. I printed it on Prusa Mini+ with 0,6mm nozzle and 0,2mm layer height. I used Prusament PLA Green and Vanilla White. I advice to print more of them at same time.
The popsicle stick can be cutted to multiple pieces so you can use one stick as 5 pieces. The best place to cut is indicated by triangle openings.
The stick is 10cm long, 1cm wide and 1,8mm thick. The connections are 2mm and 4 mm wide, therefore tolerance is 0,2mm per stick.
I hope that you will enjoy this simple model and I cant wait to see different structures and designs in comments!