1 / 1
DTL150 electronic load enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An enclosure for DTL150 electronic load enclosure that protectes the underside of the board and the radiator.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 232
- Makes
- 0
- Views
- 977
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A two-pice clam shell held together by M3 screws and brass inserts.
Requires supports for the screw holes at the bottom.
Additional parts needed:
- 8 M3 brass inserts (the hole is for 6mm version but 3mm should also work)
- 4 M3 25mm screws
- 4 M3 6mm screws
I also added some stick-on rubber feet in mine.