Cyclopes Mini PTFE Port
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Created a mini ptfe port that can be installed on any of the Eibos Cyclopes filament ports.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 43
- Makes
- 1
- Views
- 299
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
2 part model - ptfe port that mounts through the outside of the case and a nut that secures it in place from within.
Recommended Filament: None – I've printed with PLA, PA, and PC and all worked fine.
Nozzle Size: 0.4
Layer Slice: 0.16
Supports: Yes – for the ptfe port
Infill: 50% or higher - small part
PTFE Connector: https://www.aliexpress.us/item/3256802493948012.html?spm=a2g0o.order_list.order_list_main.5.21ef1802YebpSL&gatewayAdapt=glo2usa
Assembly: You will need to remove the rubber gasket from the bottom of the PTFE connector; Practically falls out. Press fit into the top of the PTFE connector and install.