XL Pixelart Pikachu
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are connectable blocks to make your favorite pokemon in Pixel style!
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 173
- Makes
- 1
- Views
- 11,377
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Warning:
- This is a huge Pixelart and takes really long to assemble. Because of the scale I recommend, using packing tape on the back of the pixelart if you want to move it around.
- Use 0.2 mm height for the pixels and the clips. I tried printing it wiht 0.3mm height and the fit wasn't perfect anymore. :D
If you want to try this XXL challenge then proceed my fellow 3D print pixel enthusiast:
You have to print every pixel in the "desired" color. For easier printing - they are named accordingly to a color. In addition you can see the "type" of block in the name as well as the number of blocks you have to print from this type and in this color.
E.g.: “Light grey x4_38”
This transfers to:
- Color: Light grey
- Type: 4x connections
- Number: Print 38 pieces of this connector in the color light grey.
Use the picture as a reference to find the right position of the blocks. It took me around 5h to assemble.
I recommend printing a bunch more snap fits. Because you will have to break them if you made an error during assembly. ;)
Have fun! :D