XL Pixelart Pikachu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are connectable blocks to make your favorite pokemon in Pixel style!
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 173
- Wydruki
- 1
- Wyświetlenia
- 11 377
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Warning:
- This is a huge Pixelart and takes really long to assemble. Because of the scale I recommend, using packing tape on the back of the pixelart if you want to move it around.
- Use 0.2 mm height for the pixels and the clips. I tried printing it wiht 0.3mm height and the fit wasn't perfect anymore. :D
If you want to try this XXL challenge then proceed my fellow 3D print pixel enthusiast:
You have to print every pixel in the "desired" color. For easier printing - they are named accordingly to a color. In addition you can see the "type" of block in the name as well as the number of blocks you have to print from this type and in this color.
E.g.: “Light grey x4_38”
This transfers to:
- Color: Light grey
- Type: 4x connections
- Number: Print 38 pieces of this connector in the color light grey.
Use the picture as a reference to find the right position of the blocks. It took me around 5h to assemble.
I recommend printing a bunch more snap fits. Because you will have to break them if you made an error during assembly. ;)
Have fun! :D