1 / 1
Modular Drone Landing Pad - Large
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
672mm (26.46IN) x 672mm (26.46IN) once assembled
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 153
- Makes
- 1
- Views
- 949
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
Note: Print in ASA or other UV resistant material if this is going to be out in the sun for extended periods.
- No Supports needed
- 1 model per plate (Fits in Bambu X1C/P1P - anything with 256mm Cubed)
- Note: On Bambu X1C don't print the filament extrusion calibration
- Plates are numbered for assembly
- You can just fit the plates together and put on the ground - or you can glue sections of the landing pad together (3 1x3 sections for example) and fit together larger pieces.
- The dovetail has -0.1MM offset face on the 3 dovetail faces, so there shouldn't be any issue with printer tuning.
- However; Dove tail test model stl is available to print to ensure printer tolerance is tuned.
Dovetail Geometry:
Dovetail Offset face -0.1mm Example:
Assembly/Size:
