1 / 1
Ankermake m5 Ikea LACK enclosure hardware
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use these hardware if you wanna make your own LACK enclosure for Ankermake m5
- Rating
- 5 / 5
- Likes
- 126
- Downloads
- 564
- Makes
- 2
- Views
- 6,768
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Here's the print list:
- Back corner base x2
- Back corner brace x2
- Front corner base x1 + mirrored x1
- Front corner brace x1 + mirrored x1
- Hinge x2 + mirrored x2
My print settings:
- Material: PLA+
- Temperature: 220C
- Layer height: 0.2mm
- Support: No support required
Other parts you need:
- Ikea LACK side tables x2
- #6-¾" flat head philips screws
- Acrylic panels. I ordered these from 3D Sourcerer
- M3 bolt with nuts. These are for attaching the hinges onto the door panels. I got these and used the 10mm length ones.