1 / 3
Batterietray - Tekno ET 48.2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick and simple Batterietray for Tekno ET 48.2
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 49
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You need two M3x25 and two M3 Nuts.
Print the holder and Thumbscrew twice.
Just add a pause after the hex section on the thumbscrews, add a M3 Nut to your print and resume.
The M3 bolts I glued into the holders.
Fit my Gens Ace 6570mah hardcase as well as my Gens Ace 5000mah Bashing. I mount them with the kabels to the outside.