1 / 1
Curtain Clip with Magnet Pocket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This remix added a 10mm x 10mm x 2mm pocket to drop a magnet in to imbed during print.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 94
- Makes
- 0
- Views
- 490
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
In this remix, I removed the divot for the magnet and added a 10x10x2mm slot in the middle for a magnet to be dropped in during printing. Please use the attached step file if you need to change the size of the slot for the magnet.
The attached gcode is a generic PLA profile with a pause added in to drop a magnet in. Prusa recommends adding a dab of super glue to the magnet so it doesn't potentially get stuck to the print head on the following layer.