Soft jaws
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.16 – €3.87 net (excluding VAT)
For file: softspannbacken_02mm_asa_mk3s_2h36m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.51 excluding VAT (range midpoint).
- Weight reported by the author
- 30 g
- Print time reported by the author
- 2.59 hr
- Source material
- ASA
- Estimate material
- ASA
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I created these soft jaws for my vice with magnets. You will need 4 20x10x2mm magnets which you insert during printing
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 135
- Makes
- 0
- Views
- 731
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I created these soft jaws for my vice with magnets. You will need 4 20x10x2mm magnets which you insert during printing with a pause. Width of the jaws is 120mm.
-----------------------------------------------------------------------------------------------------
Soft-Spannbacken für den Schraubstock mit Magneten. Man benötigt 4 20x10x2mm Magente die man während des druckens mit Pausen einlegt. Breite der Spannbacken ist 120mm.
Print instructions
Printed it with 100% infill and two print stops for inserting the magnets.