Motorcycle Kickstand Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For 18mm kickstand mounts, change over to a moto kickstand
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 49
- Makes
- 0
- Views
- 1,087
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Allow you to mount this motorcycle kickstand* to the Fiido Q1/Q1S when using an aftermarket motor extension. Likely does not fit the stock area, but feel free to remix and experiment.
We'll see how it holds up; I used PETG with 6 walls and 25% gyroid infill @ .2mm layer height. Print as oriented in the STEP file with no supports (the holes bridge just fine, and if they droop a little, just force the screw through ;D)
When used with the motor extension, you may need to size up the M6 bolts. Also, you'll need a 50mm'ish M5 bolt which is drilled in self-tapping style at the upper left as a spring retainer.
* (non-affiliate amazon link)