Motorcycle Kickstand Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For 18mm kickstand mounts, change over to a moto kickstand
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 1087
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Allow you to mount this motorcycle kickstand* to the Fiido Q1/Q1S when using an aftermarket motor extension. Likely does not fit the stock area, but feel free to remix and experiment.
We'll see how it holds up; I used PETG with 6 walls and 25% gyroid infill @ .2mm layer height. Print as oriented in the STEP file with no supports (the holes bridge just fine, and if they droop a little, just force the screw through ;D)
When used with the motor extension, you may need to size up the M6 bolts. Also, you'll need a 50mm'ish M5 bolt which is drilled in self-tapping style at the upper left as a spring retainer.
* (non-affiliate amazon link)