Flic 2 Button Wall Mount/Cage/Cradle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The adhesive on the Flic 2 buttons is great unless you have textured walls, like we do. No matter how many times we…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 109
- Makes
- 1
- Views
- 604
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The adhesive on the Flic 2 buttons is great unless you have textured walls, like we do. No matter how many times we stuck the button to the wall, it just fell right off, so I made a wall mount for ours.
There are two variations of two styles available:
• Hole mounts are intended to be mounted with a screw
• Strip mounts are to be mounted with a mini Command Strip
• Ridge models hold the Flic 2 button fairly securely but with a little play
• Drafted models hold the Flic 2 button very well and perfectly centered
I would recommend using a drywall screw or similar flat shallow screw. If the screw does not recess below the bottom of the mount, the button will wobble around on it.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
Rafts:
No
Supports:
No
Resolution:
.25
Infill:
10%
Filament: eSun PLA+ White
Notes:
You may need to rotate the model 90u00ba to sit flat on the bed.
Category: Decor