Gridfinity Dragon Skull Decoration (no magnet holes)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a dragon skull on a Gridfinity base, with a hole in the bottom for lighting from below.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 31
- Makes
- 0
- Views
- 225
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Could be a lid for a bin, or a decorative piece, or maybe even RPG terrain. Does not have magnet holes.
Sits on a 7mm base, might be too tall to look right in some situations, but most decorative Gridfinity designs seem to have a little extra height.
Has a hole all the way through for bottom lighting.
Prints without support. Painting the inside may be a challenge without an airbrush or something. I lightly sanded and primed with a few coats of Titebond 3 smeared using a produce bag as a glove, and dry brushed with brown and black for the soot and dirt effects.
I didn't make the skull, I just added the base in FreeCAD, then sculpted a bit of unevenness on the ground around it and in the hole, using SculptGL.