Gridfinity Dragon Skull Decoration (no magnet holes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a dragon skull on a Gridfinity base, with a hole in the bottom for lighting from below.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Could be a lid for a bin, or a decorative piece, or maybe even RPG terrain. Does not have magnet holes.
Sits on a 7mm base, might be too tall to look right in some situations, but most decorative Gridfinity designs seem to have a little extra height.
Has a hole all the way through for bottom lighting.
Prints without support. Painting the inside may be a challenge without an airbrush or something. I lightly sanded and primed with a few coats of Titebond 3 smeared using a produce bag as a glove, and dry brushed with brown and black for the soot and dirt effects.
I didn't make the skull, I just added the base in FreeCAD, then sculpted a bit of unevenness on the ground around it and in the hole, using SculptGL.