UCTRONICS Pi Rack mount adapter for HDHomeRun CONNECT DUO
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount allows you to install a HDHomeRun tuner in one bay of a UCTRONICS Pi Rack.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 53
- Makes
- 0
- Views
- 849
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
I created this adapter to allow me to mount a HDHomeRun CONNECT Duo TV tuner in a spare bay of my UCTRONICS Pi Rack. There is a small retaining tab that keeps the tuner from sliding out once it's installed. I added vent holes on top/bottom because the tuner gets somewhat warm while streaming and I wanted to make sure it did not overheat.
You will need two M3 captive panel screws. I used PFS32-M3-30(16) that I found on AliExpress. These screws match the panel screws that are used in the other bays of the Pi Rack. You'll have to heat them up with a soldering iron and press them into the plastic. This works well (don't burn your fingers!)
I printed with Prusament Jet Black PETG and enabled supports on the build plate only. The vent holes do not need support.