ORGONE - Organic phone stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.31 – €2.83 net (excluding VAT)
For file: ORGONE_0.2mm_PLA_MK3S_2h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.57 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 2.82 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Phone stand made of organic supports - model completely created and set up in Prusaslicer.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 62
- Makes
- 0
- Views
- 980
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
ORGONE - ORGanic phONE stand
Made completely within Prusaslicer 2.6.
You can edit the “box.stl” block inside the project to adjust the angle or position of the phone and use support paint tool to modify the supports to your liking but the version uploaded with the position, angle and supports settings is what came up best for me.
I am also adding STL file of my generated stand if you don't care or are using other slicer SW. Print it with two perimeters, 0,2 mm layer height, 0,6 mm layer width, 0% infill and you should get pretty much the same result.
Enjoy your growing stand.