ORGONE - Organic phone stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Phone stand made of organic supports - model completely created and set up in Prusaslicer.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 976
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
ORGONE - ORGanic phONE stand
Made completely within Prusaslicer 2.6.
You can edit the “box.stl” block inside the project to adjust the angle or position of the phone and use support paint tool to modify the supports to your liking but the version uploaded with the position, angle and supports settings is what came up best for me.
I am also adding STL file of my generated stand if you don't care or are using other slicer SW. Print it with two perimeters, 0,2 mm layer height, 0,6 mm layer width, 0% infill and you should get pretty much the same result.
Enjoy your growing stand.