1 / 4
Safety power off switch - Ein Aus Schalter Maschinenschalter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
adapter for a off the shelf power switch to add the emergency off
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 32
- Makes
- 0
- Views
- 315
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have created a adapter for a power switch, to add the off plate to it, because the price deference was substantial.
I made the design for easy printing in mind (quick 1hr for all parts, no support), hence 3 parts, that you can print and assemble easily.
- you can use glue or a screw to connect the adapter to the power switch
- the off extension of the plate, would require to be glued on the back of the plate (aligned to the off switch bottom)
- the Off plate just snaps in the base, no need for any extra parts.
this is the cheapest switch I could order on amazon: power switch.
I printed the adapter in PETG black (to be more rigid) and the off plate switch in PLA red / white.
basically you can use any combination.
you can use glue or a screw to connect the adapter to the power switch.