10,853 models
English While wine is made up of more than 400 aromas, coffee is made up of more than 800, making it one of the most complex natural products and giving it a wide range of flavors depending on the coffee bean and the method of roasting…
The makers of Diablo IV have shared their amazing 3D model with me to make one of my stop motion animations which I have adapted for print and have kindly let me share this beautiful model with the community! I can't wait to see your…
ZeroG Astronaut, printed for fun or serial videos for the Mercury One! Recommended settings: 10% infill 4 Perimeters 4 top/bottom layers
Easy to make a cute Cat with Coffee keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
EDIT: updated parametric version It’s also possible to use it without the inner box. The purpose of the inner box is to let coffee pucks dry so mold wouldn’t develop so easy. Buy me a coffee
Accent your coffee corner with these fancy coffee bag clips. These clips will help keep those coffee grounds fresh! Just squeeze the folded bag top until it is relatively thin and effortlessly slide the clip over the fold. See my other…
Easy to make a cute Axolotl having coffee keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
This 3D model is a coffee cup holder that attaches to a stroller, making it a must-have for parents who enjoy a hot drink while on the go. The holder includes several parts that can be 3D printed and assembled with the help of some…
NASA Space coffee mug ( capillary cup ) enables drinking in zero gravity. Now we can all drink like astronauts. Also it is fun way of teaching kids about physics and space. If you want to drink from it make sure you treat it to be food…
Meet Mini Coffee Bean Buddy , the tiniest caffeine-fueled friend in the Mini Buddies family! ☕✨ ✅ Adorable & Tiny Design – A fun and quirky desk buddy ✅ Perfect for Desks, Shelves & Collectibles – Small but full of personality ✅…
charnière de remplacement pour porte de tableau électrique LEGRAND EQUINOXE
Easy to make a happy Coffee Machine keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Easy to make a cute Cup of Coffee keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
This gcode will help find the correct z offset for a 3D printer's nozzle. It is a back and forth square (hence “oxplow”) that begins at -0.1 mm below the current nozzle offset and raises it each row until it ends at +0.1 mm above the…
Store up to 6 pairs of scissors with this knife-block inspired organizer. The channels measure 15.8mm x 22.8mm, make sure your scissors will fit before printing! I recommend adjusting the infill and set to your desired weight. The block…
The castor is from the Guitel brand specifically for office chairs with a universal stem, The repair was necessary for two reasons, because some of the wheels on my chair stopped turning and the appearance no longer looked as if it were…
Because the IKEA Lack table I used for my enclosure had already been assembled according to the IKEA assembly instructions, one of the holes in the centering part lines up with the hole already created by the double sided IKEA screws. So…
I designed five star rim for a Tamiya rc car compatible 1:10 model, 52mm diameter, 26mm width, 4mm hole and 4mm positive offset. There is also the hubcap and the tool to screw it to the rim. Print with a layer of 0.15 otherwise the tool…
Off-Duty in the Outer Rim Collection: Vaders “Sith Squash and Vine” a Gourd Hobby Farm. The getaway from Mustifar is a remote swamp island on Felucia. Vader grows his crafts gourds here and is well known for the quality of birdhouse gourds.
Coffee carousel! Dolce gusto capsule holder Another fun model for you! Enjoy your coffee and have fun! The carousel is for 1 0 Dolce Gusto capsules . Be careful! When it is not full, it is very unbalanced, I recommend constantly refilling…
Officer Earl Devereaux From Cloudy with a Chance of Meatballs.
I love my Comandante manual coffee grinder but I always forget to how many clicks I had set my burr, especially when switching between coffees and brew methods. So I created this little counting gadget in Comandante style. It makes a nice…
This is a mount for holding a Stanley Fatmax 9mm snap-off knife (model 0-10-475) on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need only one nut and the M2.5 hardware to attach it. I use an…
The classic italian knock box, re imagined for FDM printing and upgraded with features! Rod-less design for very easy and super sturdy print High rim prevents spill while knocking Wide socket for secure stand without tilting Removable TPU…
Revision 2 Dies Das ist Revision 2 des offenen Cookit Deckels und ersetzt die beliebte Vorgängerversion . Diese Revision ist passgenauer und vor allem formstabil. Die Vorgängerversion verformte ich mit der Zeit vor allem bei…
Odměrka na kávu, cukr a podobné sypké hmoty (Measuring cup for coffee, sugar and similar loose materials)
this is a 20 yard dumpster i created to mimic dumpsters i own. will have updated model with swinging gate for realistic
Coffin light switch box. I only remixed the Tall version. I've added the .stl, .3mf and .gcode files. I used the following settings Wall line count: 4 Infill Density: 15% Infill Pattern: Lines Support: Yes Support Pattern: Grid Support…
You need just one hook to hang a ceiling light and at least three of theese stand-off sets for leveling. I use a cable tie to hang a lamp in one point (between the lamp and one already installed ceiling hook), than I tie the cable tie. At…
Needed magnet: squared: 5x5mm, thickness 3mm or rounded: diameter 5mm, thickness 3 mm
coloured in the italian flag colours. #italian #coffee #love #bialetti
I purchased a new puc and coffee distributor for my Oster expressor machine. I needed something to hold the portafilter steady without making a mess and also to store it all afterards. This simple print will work for most portafilters…
Items needed: 1 x Raspberry Pi Zero W 1 x Raspberry Pi Camera module 3 Wide 1 x Raspberry pi Camera Cable (300mm) 1 x Filament of choice 4 x M2 screw (15mm) 4 x M3 screw (10mm) 5 x m4 screw (16mm) 1 x MicroUSB Cable (Length is up to you)…
Printed with 0.4 nozzle & 0.25 layer height. Faster settings per my usual and no issues. Still pretty new to the game but I'm interested to see if any of these would work in vase mode. The shapes seem like it would be doable, but I'm not…
I love the Kalita Wave 155 dripper for pour-over coffee, but I want to use commonly available basket filters, like these for instance. This little tool will re-shape a larger filter to fit correctly inside the dripper. Print directions |…
Off-Duty in the Outer Rim Collection Master Luthier C3PO at Willow Wood Worshop Widely known in the outer rim for his pristine soprano and baritone ukuleles. Its also an ice cream shop.
Off Duty in the Outer Rim : Leia's teenage Grunge Band “No Krew Remains” The blaster fire faded, but the echoes of captivity lingered, a cold, metallic tang that clung to Leia long after her escape. Publicly, she was the picture of regal…
Needed a model for a project which is more solid than the real coffee capsule. So this is what I've created :-)
This is a simple double hook/hanger, that has enough enhancements not to break, for a coat and a handbag. Hang it on top of a door or an office divider. Make sure you have clearance above the door to the door frame, if you need to close…
Pen cup for office partition with a mounting rail. Its around 7cm x 7cm x 8 cm. I put small tabs to support the mounting hook while printing so it shouldn’t need supports. You need to remove them after the print finishes. I also included…
Given the cost of grass seed these days and the amount of effort one must invest to seed their yard, I certainly want to maximize my germination rate. Main goal of this sign is to prevent the neighborhood dogs from using the bathroom on…
layer: 0.3 perimeters: 8 infill: 50% material ASA (watch out for curl when printing)
Ich fahre manchmal ein Brennstoffzellenfahrzeug das mit Wasserstoff betankt wird. Da ist es immer gut, einen passenden Einkaufswagenchip dabei zu haben.
This coaster is designed to catch any stray grounds that fall from your coffee grinder, keeping your countertop neat and easy to clean. It includes seven holes for attaching standard furniture bumpers (9mm - example ) or slip-resistant…
Perfect fit for all automatics coffe machine, for cleaning coffee waste.
Die 440/480Watt Solarkoffer von Plug-In Festival, Wattstunde, Enjoy Solar oder Offgridtec können nur in einem festgelegten Winkel aufgestellt werden und der ist extrem flach. Meine einfache Lösung verwendet mehrere Schlüsselbänder mit…
To work with the 3M WorkTunes, I had to heat up the knob to 170*F, press it onto the shaft, and let cool. Heating the knob and allowing it to cool on the shaft is what makes the splines on the shaft bite into the plastic. I did not try to…
This stand-off was designed to work in tandem with the X-Carve Makita Router Dust Shoe 4" Dust Collection System I designed. It mounts to the Z-axis motor (must remove motor to slide on then reinstall) and has two threaded holes for use…
A simple notch that fits between the water tank and the coffee machine to stop the lid of the water tank and the water tank from vibrating and rattling. Modeled for Cecotec coffee machine. I would recommend printing in TPU, but PETG does…
Just a swimming buoy to make it easier to see how much water is left in the water tank of the coffee machine. I made this for a Siemens or Bosch fully automatic coffee machine. Just because it is for example in the morning not always easy…
Description This model is designed to work with my holder design for a customizable office nameplate. Print 2 feet, and insert into the nameplate holder to use it on a desk, rather than a wall mount. Recommended print settings: Material:…
The Temper station replaces the Lid of an Eureka Mignon Mill with a Lid of 120mm x 120mm. It has place for a Temper, Leveler, Brush, blind screen all fitting to a E61 groupset (58mm).
J'ai créer un coffret pour me faire une alimentation variable DIY l'installation électrique est composée d'une alimentation 220v vers 24v poussée a 30v Pour gérer le 0v/30v je suis passé par un DC/DC bulk variable trouvé sur aliexpress…
Ceci est un rangement mural pratique pour mallettes Action. Réalisé en Petg Arianeplast.
Being annoyed by the crappy paper foil lid of the coffee whitener powder I use every morning, I have designed a minimal coffee powder lid with a portioning opening for e.g. "Gut und Günstig Kaffee Weißer" and other comparable brands in…
These are designed for PETG. They are trimmable, and can be glued into corresponding slots with CA.
Do you need a lot of coffee to survive your day? Do you use a lot of Illy coffee?
Ergonomic coffee tamper for espresso machine 50mm base & knob diameter. Fits perfectly in hand made for 50mm brewers
Temper station 58mm E61 groups fitting on WECK jar which I use for coffee cookies.
Voici une clé que j'ai modélisée pour réparer la serrure de mon coffret électrique EDF . Je l'ai fait volontairement dépasser pour pouvoir l'ouvrir à la main. Je l'ai imprimée simplement en PETG, je l’ai fait de façon à ce qu'elle soit…
Nothing more than a square, 0.2mm high so it prints a single layer. I use this for setting the Z offset. The printer's own Z offset calibration is a good start, but it can be a challenge to get the height just right if you haven't done it…
This minimalist bag clip is a simple, reliable way to seal open coffee bags and keep your beans or grounds fresher for longer. Designed for fast printing with no supports , and strong enough for everyday use. Perfect for coffee bags, tea,…
[Update] ---2025/01/21--- Ultra size cat released!! It is about twice as long as Extra size and looks like a dragon, so looong! This is a super long version of “Flexi Holding Cat” which was previously released. Since there were many…
Cruiser USS St. Louis No supports needed Little to no glue Dozens of details & elements In-game St.Louis cruiser included World of Warships and Printables have joined forces to bring one of the most detailed models of a famous naval…
NEW Added 200mm clip arm for larger bags. Updated: 08/16/2024 - added an extended angled version of the insert to accommodate low cabinet clearance. @Leon61 thanks for the suggestion Updated: 04/07/2024 - added an extended version of the…
A 3D printable Voronoi pencil holder. Keep your pens and pencils in one place with this stylish Voronoi pencil holder. The Voronoi cell structure gives this holder an elegant look and translucent features. The model is easy-to-print,…
So this is a gimbaled to-go coffee cup holder. Fully 3d printed, assembly is just spin the bolt in. Designed to clamp a bar 20-30mm in diameter, as well as flatter things, like dashboards, etc. The diameter should fit a large double…
Update 6. Aug. 2023 The STL ist about an 1cm larger than what you see on the Lavazza photo. You can print it a little bit smaller if you want. Especially if you put you coffee bag into a Kellog's tin can as shown in the background. Update…
THE TEST DISC Simple, yet VERY effective way to dial in your Z-offset to perfection. Notice the change in the image. From right to left, as I adjust (Baby Step up/down) the z-offset. Example: I started at a z-offset = -0.98 (which felt…
My Ultimate Cereal Container Filament Drybox has been out in the wild for a few months, and after some great feedback from all of you and continued use in my setup, I've decided to make a few official changes. The biggest change is a…
Add a sip of humor to your keys with the "Ghost Drinking Coffee Keychain" – a whimsical, easy-to-print accessory that proves even ghosts need their morning coffee. It's a humorous and adorable nod to coffee lovers and ghost enthusiasts…
General I wanted a simple and fast test pattern that got to testing the farthest corners of my bed early in the print and then had plenty of time for me to adjust the z offset so that my prints would stick all the way to the edge of my…
The source marked this model as adult content.
The official case for The Everything Presence One - available to print for yourself! Featuring a stand that allows for mounting in all directions, holes for wall mounting, cable passthrough holes and a completely tool-less design allowing…
This simple tool helps find the proper offset for your Cartographer probe in relation to your nozzle tip. Having a 2.6-3mm Z offset is critical for reliable operation of Cartographer Touch (nozzle probling). The Y offset ruler is just a…
Tired of receipts, dust, and other debris clouding your workspace? This 3D Printable Mini Trashcan is the perfect tool for throwing away, storing, or disposing trash and other belongings. This print features a fully functioning built-in…
Coffe Clip with lid bigger lid for easier manipulating with beans easy print without supports Print settings 0,2 mm layer main body (print in part) 0,1 mm lid and insert part 5 walls (for hinge i add modifier for 8 walls and top and…
Summary Easy-to-print and without supports printable buddy in the form of an paper coffee cup. The cover can be screwed on using the thread. I hope you like it! Multicolored version available! Print no supports! 0.2mm layer height or…
100mm x 100mm x 0.2mm sheet to test z offset and bed levelling.
This is a replacement backplate for the Creality Ender 3 S1/S1 Pro Sprite Extruder that moves the CR Touch probe inline with the nozzle on the Y axis producing a zero probe offset. Many people are having issues with automatic bed leveling…
This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…
The original author of this test contacted Creality directly to get this bed leveling test. He also created a video testing the bed leveling and showing all the findings:
Official metric remix of Maff's amazing Netwonian reflector telescope nicknamed “Hadley” . Make sure you go and read his Printables post too, as well as the #hadley-instructions channel on his Discord server , as it includes some extra…
A modern but timelessly designed small office organizer for pens, letter openers, scissors and all the stuff that would otherwise fly around on the desk. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and…
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
Mountain styled coffee filter holder ! * EDIT 14.04.2025 : Here is the onshape link, where you can copy the document. * EDIT 25.03.2025 : Added 100mm size that can be esaily shrink to desire size. Also added 100mm STEP file if you want to…
Heavy Duty Guitar or Bass Guitar Wall mount hidden Screw Design. Fix the bracket to wall then slot mount over Comes in - 53mm(approx internal prongs) - 53mm neck slot with 5mm wall offset - 53mm neck slot with with 10mm wall offset - 43mm…
DISCLAIMER: Use at your own risk! Not responsible for damage to your printer or accessories! Important: Always restart your printer after using this file! This file uses the G92 command, which changes your printer offsets. These offsets…
Full credit for the STL goes to 3_D_M_A on Thingiverse . I simply took the original and sliced it up with the M600 command to accommodate color changes easily. People asked for it so I'm posting it here on PrusaPrinters since the file is…
Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…
The Coffee Bean Vase is a delightful 3D-printed creation that brings the rich, comforting essence of coffee into your home decor. Designed to resemble a coffee bean, this vase is perfect for holding fresh flowers, dried arrangements, or…
Updated v2 : The box around the people was a bit off center top to bottom. It has now been fixed. After messing around with some of the other The Office signs, none of them were quite right. Here is my attempt at creating the The Office…
Enjoy a sip of humor with the “Cat Drinking Coffee Keychain” – a cute, easy-to-print accessory that features an adorable cat drinking coffee from a mug. It’s a perfect gift for anyone who loves cats, coffee, or both, capturing the fun and…
This was painted in Bambu Slicer for the AMS with four colors. Rather than just painting each layer a different color, I tried to match the original print as much as possible, including painting on some details on a few layers. I painted…
I was looking for a keychain that looked like the starbucks tumbler. I found one that looked ok, but the through hole for mounting to a keychain was just all wrong. So I created this model from scratch in Blender. Its a cylinder that is…
IKEA Skadis compliant wall panel with 6x6, 5x5, 4x4 holes and other sizes. The standoffs are 25mm. The front will be 30mm from the wall. Mounted with 4x screws, ideall sunken head. Print with 10% gyroid infill, 3 top, 3 bottom layers, 3…
Video of the finished bearing on Instagram: https://www.instagram.com/p/BPA0LYlDdlO/ I wanted to create my own ball bearings for my filament rolls, and have experimented with the details. The outcome is this design, which is ready to…
Update 7/5/2025 I really appreciate all the support and attention you've all given to my work. I wanted to make something that would be useful for a lot of people, and the response has been far greater than I ever expected. That said,…
Start your day with the “Dog Drinking Coffee Keychain” – a charming and fun accessory that features a cute dog enjoying a mug of coffee. It’s a perfect companion for those who love dogs and coffee, capturing the cozy and relaxing vibe of…
![[Official Remix] Flexi Extra Size Cat (Print-in-place)](https://media.printables.com/media/prints/1146999/images/8658584_808cb494-2549-4a42-b5ae-72f60e7726bc_9fdfc9b3-37cb-4725-a000-bcc358fe757e/extra-size-cat-1-2.jpg)
