1 / 11
Heavy Duty Guitar Wall Mount (2 SIZES & WALL OFFSETS)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heavy Duty Guitar Wall Mount
- Rating
- 5 / 5
- Likes
- 960
- Downloads
- 3,765
- Makes
- 41
- Views
- 12,368
- Reviews
- 33
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Heavy Duty Guitar or Bass Guitar Wall mount
hidden Screw Design. Fix the bracket to wall then slot mount over
Comes in
- 53mm(approx internal prongs)
- 53mm neck slot with 5mm wall offset
- 53mm neck slot with with 10mm wall offset
- 43mm neck slot width
- 43mm neck slot width with 5mm wall offset
- 43mm neck slot width with 10mm wall offset
- MUST print bracket laying down so layer grain runs the length or bracket
- MUST print the mount standing up. If not, I can not guarantee the strength of the part.
- 0.2 layer height
- Minimum of 3 wall thickness
- 20% Gyroid infill
- The guitar mount works great in quality PLA, but stronger materials would be beneficial.
- See the image attached for hole dimensions. I used M4 Screw. Approx 40mm in length
- Use suitable wall fixings to avoid failure.
For Ukulele Wall mount
https://www.printables.com/model/823312-heavy-duty-ukulele-banjo-instrument-wall-mount