Counting matching models…
Many years ago the 9 volts battery holder of the preamp on my Ibanez acoustic guitar GA5TCE broke. This is the first model I made to be 3D printed and it fits, clips and holds the battery in place perfectly. Print with the rectangular…
Ibanez guitar with Kirk Hammet signature on frets. Need support
This replace my old 1996 Vester guitar pickguard. Its model is VE1020 and was manufactured in Korea. The guitar manufacturer no longer exists and a replacement for the pickguard was nowhere to be found, so I decided to design it myself…
Electric guitar pickup selector switch knob designed to fit my Ibanez RG370DX. A little on the small side and very tight on the selector switch, may want to increase the scale 10% or so. I just heated up the selector switch metal prong…
Hi fellow makers, this is my first real 3D model, not just remix. GOAL I want to make as-real-as-possible scaled keychain model of Ibanez GRG140 electric guitar, optimized for Prusa MINI+ using standard 0.4 nozzle. Model will be…
@ First: I prefer Pickholder - Vai Style - Ibanez - curved with cuts.stl It is easy to print and stable. //////////////////////////////////////////////////////////////////////////////////////////////////////// This 2 Versions: Pickholder…
Ibanez Guitar Amp Knob All the knobs were breaking on my Ibanez acoustic amp so I designed this simple replacement. Although it was designed for an Ibanez amp, it would fit any amp with a 6mm shaft that is 4.5mm to the flat of the “D”.…
Back-plate for a 2007 Ibanez RG1570 Prestige. Might work on other RGs and/or other years. Not sure. Designed at 138.85mm x 85.7mm dimensions. My original back-plate has been falling apart over the years, mostly breaking around the screw…
I needed to install the battery pack attachment for the Fishman Fluence pickups. Instead of opening a hole to the original plate, I instead designed this one. You have 3 options: Original Cover Plate without any extra openings Cover Plate…
I would say, pure but powerfull! Ibanez iceman guitar model. First time 7 string. 35 cm long. Best resoults with 0.1 layer. Only two pieces, no supports needed. Check out my other designs: Ibanez Jem –…
This Humbucker Mounting Plate was designed for Ibanez Gio guitars. No shell geometries were added in order to strenghten the part against the compression of the humbucker's springs.
Designed to hang your Ibanez SR bass on a wall. It fits the asymmetric shape of the neck's headstock. Two slots are available to place guitar picks. Print it upside down (the mount's top on the printer's bed) for the best strength. Use…
this is a pickup cover for (almost) all ibanez guitars. If you want one without the ibanez logo on it just ask in the comments. ____________________________________________________________________ PRINT TIPS: The walls are a bit thin so…
Back plate for an Ibanez Guitar (Printed in cookiecad's Witchcraft PLA) No supports "Mouse ear" brim
Starship Troopers - Carmen Ibanez - 1997 3D printable model.
Ibanez Gio Replica for 3D Printing This model was created based on an Ibanez guitar and can be easily printed using PLA or PETG. This project was one of my first larger endeavors that I created in Fusion 360 and on a 3D printer. The…
//////////////////////////////////////////////////////////////////////////////////////////////////////// Sometimes i mount things by “'priming/protecting'” a surface with tape and then using hot-glue or superglue to mount the thing to the…
This pickguard will fit your Ibanez GSR200. If you print it with PLA it will fit just as it is. For materials like ABS, I recommend upscaling X and Y by 0,15% - worked for me. The one on the picture is from ABS finished with acetone…
This is a replacement torque bushing for The Ibanez Edge series pop-in tremolo bar. Instructions I printed @ 0 fill 3 walls 100 micron. Caveats: These have an outward draft, be sure to insert the thinnest feature tword bottom of the bar…
It is what it is, nothing less and nothing more - covers for the electronics and battery for the Ibanez GSR200 bass guitar. Printed with Prusament PLA on MK4. Enjoy!
Tool for manipulating mechanicals when you replace the strings
Printed this little spacer for my ibanez bass. The original broke off, and it isn't a super high-stress part, so I just designed this and 3D printed at the highest detail possible. Took a couple tries to fit right, even though I measured…
I modeled the tremolo springs cover for my Ibanez JPM100. Guitar is from the 1990s, therefore it shoudl work on any RG or similar model from the 1990s. Dimensions and screw spacing are taken directly from the guitar. I added a 1.5mm…
Ibanez AMH90 Pickguard and truss rod cover, pretty self-explanatory :P The pickguard in the photo was printed in a 3 ply effect, using black, white and gold PLA. I suggest printing it upside down on a textured sheet to have the top…
Support de téléphone portable IBANEZ
Modeled from an Ibanez CP9 battery lid/plate. while this one does work, i may modify it slighly were the two screwheads touch this battery plate. I did PETG and printed it vertical with supports. This gives more flexibility to the release…
Reparacion de puente Ukulele Ibanez Uk-S10
Lost the cover to my Ibanez BTB405QM and decided to add a little flavor w/ the logo there. Unsure of how many models this will fit on so including a PDF drawing with dimensions so you can you check it against yours to see if it's…
Have a vintage Ibanez 10 series guitar pedal that you lost the back plate for? Or maybe you want to mount your Ibanez 10 series pedal to your pedal board using pedal board tape or Velcro but don't want to risk ruining your original…
For the umpteenth time Ibanez SPT guitar preamp in my Ibanez PF60 acoustic guitar has failed... I don't want to deal with the repair again (or maybe I want, but don't have time now), so I found a cheap alternative that has as similar…
This is a backplate cover for a 1990s Ibanez S-series electric guitar. It has been successfully installed on such a guitar, however it may fit both other Ibanez S-series guitars sharing the same screw hole positions and dimensions, and…
Ibanez JEMJR Steve Vai Signature Electric Guitar Pick Guard. SVG included in case you want to CNC it out or something. There is a squared off version, and a beveled version. This thing is pretty big so it will probably need to be split…
One thing that always annoyed me about my electric bass: the 9V battery would happily drain itself if you forgot to unplug the cable. This model solves that problem by adding a simple switch to the electronics cover, wired directly to the…
Reverse engineered a (customisable) dimensionally accurate housing for the Ibanez MTZ11 Multitool. Can be easily customised and modified as needed. RMT Edition STLs have slightly refined curves to make the part easier to print (and use!)
I got a deal on an old Ibanez JS100 and decided to just mod it out completely. Part of that was installing a Gotoh bridge for better tuning stability and so I could install a D-Tuna. The trem block was a bit deeper than the stock Lo-TRS…
I run my Ibanez PTEQ pedal as an always on pedal so it does not live on my pedal board. This case and lid were designed to make it where I can throw it into a bag for transport and not have to worry about the knobs being messed up. I left…
This tremolo block was designed for Ibanez Edge III tremolo, installed on Ibanez GRG250DX. Blocks tremolo in reverse direction but allows to pitch dive. Printed using PLA using standard 0.2mm layer preset for Bambu Lab P2S, 5 wall loops,…
One thing that always annoyed me about my electric bass: the 9V battery would happily drain itself if you forgot to unplug the cable. This model solves that problem by adding a simple switch to the electronics cover, wired directly to the…
Thanks to MalinaPL & their "Ibanez Jem mini guitar model" I was able to make a version based on my early 90's RG 450 DX. The model is divided into 8 .3mf files and uses 5 materials (PLA Brown, *AzureBlue, Silver,Black,White @ .020).…
Created for the Ibanez SR 400 bass guitar as a replacement for original electronics cover.
i have replaced my original battery holder on my Ibanez SR600 for a new one from amazone.
Printed in PETG with no supports and 100% infill. This works on my Ibanez AR250 but likely works for other guitars (or can be scaled)
Not too much to say about this other than it allows the Line 6 Relay to plug into a S series Ibanez without and adaptor.
Hello! Today I want to show you famous Stevies Vai signatured Ibanez Jem. Model is 35 cm long, just in 2 piecies. Need only to glue neck to body. No supports needed. Best results with 0.1 layer and 0.4 nozzle. I will be grateful for…
I printed it in white PLA for easier painting. 15% infill Supports needed for neck.
These pickup rings were designed to fit a specific combo of EMG 707 pickups and an Ibanez RG where the neck pickup sits against the neck so the ring can't go all the way around. They are purely for aesthetic reasons and really serve no…
I needed a replacement truss rod cover for my Ibanez bass. It is recommended that it be printed in two layers, white on the bottom and black on the top.
Remixed the model found on thingiverse so it would work for my 3d travel ukulele
