1 / 3
Ibanez RG tremolo springs backplate — image 1
1 / 3

Ibanez RG tremolo springs backplate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tremolo springs backplate cover for Ibanez RG and similar models from the 1990s.

Rating
0 / 5
Likes
2
Downloads
34
Makes
0
Views
108
Reviews
0

Updated at source:

Model information

Category
Music
License
Creative Commons — Attribution

I modeled the tremolo springs cover for my Ibanez JPM100. Guitar is from the 1990s, therefore it shoudl work on any RG or similar model from the 1990s.

Dimensions and screw spacing are taken directly from the guitar. I added a 1.5mm chamfer to the lower edge as the guitar paint tends to be quite thick along the edges, therefore a little bit of space is desirable.

Tested on my guitar and sits perfectly flush.

Printed in ABS, layer height 0.25mm, but any setting and material will do since it is not structural, but only needed for protecting the springs from dust and dirt.

I uploaded the stp file, so that you can modify the holes spacing and overall dimensions if you need to adapt it

Tags