Ibanez RG tremolo springs backplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tremolo springs backplate cover for Ibanez RG and similar models from the 1990s.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
I modeled the tremolo springs cover for my Ibanez JPM100. Guitar is from the 1990s, therefore it shoudl work on any RG or similar model from the 1990s.
Dimensions and screw spacing are taken directly from the guitar. I added a 1.5mm chamfer to the lower edge as the guitar paint tends to be quite thick along the edges, therefore a little bit of space is desirable.
Tested on my guitar and sits perfectly flush.
Printed in ABS, layer height 0.25mm, but any setting and material will do since it is not structural, but only needed for protecting the springs from dust and dirt.
I uploaded the stp file, so that you can modify the holes spacing and overall dimensions if you need to adapt it