1 / 1
Ibanez Tuning Peg Spacer/Washer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for the little white spacer/washer on an Ibanez tuning peg.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 34
- Makes
- 0
- Views
- 213
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Share Alike
Printed this little spacer for my ibanez bass. The original broke off, and it isn't a super high-stress part, so I just designed this and 3D printed at the highest detail possible. Took a couple tries to fit right, even though I measured with calipers.
Because it is so small, had to undersize it by a specific amount to print properly on the printer.
Print Settings:
- Infill: 100%
- Print Detail: Highest Detail Possible
- I printed at .05mm layer height on Prusa Mini
--------（ ^_^）o自自o（^_^ ）--------
If you'd like to support me you can post a make, comment, give me a follow, and/or buy me a coffee here.