Buckle Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Buckle (Sewn-In) Hi there -- this is a replacement buckle for a backpack strap. The original was on a sewn-in loop of…
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 163
- Makes
- 2
- Views
- 944
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Update
(28/May/2023)
Made the ridge where the webbing passes through pointier so that it catches and holds a little better.
Buckle (Sewn-In)
Hi there -- this is a replacement buckle for a backpack strap. The original was on a sewn-in loop of webbing. It least it was until it wasn't. This replacement fits a 25mm (1in) webbing though you can probably scale it if required. For structural reasons, I used a 35mm 4M bolt to loop through the webbing and secured it with a nylock 4M nut.
I've included the .STEP file if you want to modify the design for your purposes. Have fun!
Print Settings
Resolution:
0.2mm
Infill:
15%
Notes:
Use extra perimeters to make certain the sides are solid. I printed it flat on the bed, with organic supports, though I think the bridging should be fine without it.
Post-Printing
Installed!
Category: Replacement Parts