1 / 1
2013-2018 Ram Dash Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A convenient flat surface in the perfect spot for a GPS/Phone mount.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 78
- Makes
- 0
- Views
- 661
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This was designed to go into the little cut out above the radio on Ram 1500s. Take out the rubber, remove the 2 screws and screw this model in its place.
It is not recommended to print this in PLA as cars do get hot especially in the southern states in summer. You might be able to get away with PETG, but I made mine out of CF Nylon for the heat resistance and strength.
Print at ≥50% infill, at least 3 perimeters.
Recommended to print with the flat side on the build plate to minimize necessary supports.