Lacket (Bracket for Lack Enclosure)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable bracket designed for the Lack enclosure, but you can use it for anything really.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 36
- Makes
- 0
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is the Lacket (Bracket for Lack Enclosure)
I designed this to secure my lack enclosure to the wall to prevent it from wobbling as much and increase print quality.
This won't be as sturdy as a metal bracket, but now you don't have to run to a hardware store to pick up one that's just the right size.
I've created four different lengths because not all baseboard are created equal:
- 50mm
- 100mm
- 150mm
- 200mm
I designed them with #8 wood screws in mind, but the holes are ~5mm wide so you can use an M5 screw or something smaller with a washer.
I recommend staggering the screws that hold the bracket to the enclosure to minimize vertical movement. (I didn't secure it to the wall yet in this image)
Print Settings:
Layer Height : 0.28 w/.4mm nozzle
Supports : No
Raft : No
Infill : 15%
Perimeters : 6
Top/Bottom Layers : 4
Material : PLA