Lacket (Bracket for Lack Enclosure)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable bracket designed for the Lack enclosure, but you can use it for anything really.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is the Lacket (Bracket for Lack Enclosure)
I designed this to secure my lack enclosure to the wall to prevent it from wobbling as much and increase print quality.
This won't be as sturdy as a metal bracket, but now you don't have to run to a hardware store to pick up one that's just the right size.
I've created four different lengths because not all baseboard are created equal:
- 50mm
- 100mm
- 150mm
- 200mm
I designed them with #8 wood screws in mind, but the holes are ~5mm wide so you can use an M5 screw or something smaller with a washer.
I recommend staggering the screws that hold the bracket to the enclosure to minimize vertical movement. (I didn't secure it to the wall yet in this image)
Print Settings:
Layer Height : 0.28 w/.4mm nozzle
Supports : No
Raft : No
Infill : 15%
Perimeters : 6
Top/Bottom Layers : 4
Material : PLA