Neptune 3 Pro - Articulating Corner Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After being asked from the last one I made, I created an articulating mount for the Elegoo Neptune 3 Pro
- Rating
- 5 / 5
- Likes
- 56
- Downloads
- 151
- Makes
- 1
- Views
- 2,424
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is an articulating corner mount for my Neptune 3 Pro, which if the spacing on the corner bolts (10mm) is the same as that on the Plus or Max, it should work on those too. There's a platform with a M6 hole to be able to mount a webcam or whatever is needed, as long as you have the proper screw for the camera mount.
There's a phone cradle as well, designed for a pixel 3, but as long as your camera notch looks through the cutout, you shouldn't have any issues, other than me not testing it. Its a carry over from the fixed mount I did.
MAKE SURE TO PRINT 3x CORNER JOINT.STL
Everything should be able to be printed without supports.
15% gyroid infill (25% grid or triangles would work)
no supports
Elegoo PLA @ 210 C
PARTS:
6 - M4 x 20 socket head bolts
6 - M4 nuts
2 - M5 x 16 socket head bolts (Attaches to Neptune 3 frame in place of factory bolts)
If using phone cradle
1 - M6 x 16 socket head bolt
1 - M6 nut
If you do not have socket head bolts and only have the hex head, I've included the finger screw head from another file.
This will always be a work in progress, as when mine has issues I'll revise it and make sure to post updates on here.