Nuka Cola Clock (MMU)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a clock based on a super-large bottle cap from a Nuka Cola bottle of Fallout games fame.
- Rating
- 3 / 5
- Likes
- 59
- Downloads
- 233
- Makes
- 0
- Views
- 1,267
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
This is a clock based on a super-large bottle cap from a Nuka Cola bottle of Fallout games fame. I started with the model by techoutreach](https://twitter.com/tech_outreach73) here on PrusaPrinters but modified it to:
- integrat the lettering into the shape for MMU
- print face down on the bed and shelled the whole model to use significantly less material;
- integrate a mount for a digital clock movement
Since @tech_outreach was kind enough to provide a STEP file of his model, so shall I =)
Print instructions
I chose to use supports for the edges of the face for a nice, gradual curve. This left me with some sanding to do. I used 220, 800 and 2000 grit sandpaper to smooth out the transition from the clock face to the sides. Then, I applied a single coat of spray polyurethane. I was quite blown away at the resulting shine!