Reolink E1 Zoom Ceiling Mount for Prusa Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount the Reolink E1 Zoom camera into your Prusa Enclosure, with this ceiling corner mount.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 68
- Makes
- 0
- Views
- 777
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
IMPORTANT: Please check your cameras hardware version!
For Hardware Version 1 → Select model: E1 Zoom Ceiling Mount - HV1
For Hardware Version 2 → Select model: E1 Zoom Ceiling Mount - HV2
Print Settings
Printed on MK4 with PETG, 0.20mm QUALITY.
I added supports underneath the twist-lock fastening connector pin in Slicer.
Additional Parts
Additional parts needed (included as spare parts with the Prusa Enclosure):
- 2x M3nS nut
- 2x M3x8 screw
Installation
Insert two M3nS nuts into the mount. Use the 2.5 mm Allen key to completely push the nuts inside.
Put the part in the upper corner of your enclosure and fasten it with two M3x8 screws from the top.
DONE!