HEVO Extruder with Dual RJ45 Mount - bltouch or piezo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of a great extruder mount for the HEVO https://www.thingiverse.com/thing:2617424 and an FT-5 Carriage…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a remix of a great extruder mount for the HEVO https://www.thingiverse.com/thing:2617424 and an FT-5 Carriage - RJ45 x 2 round sensor Mount https://www.thingiverse.com/thing:2569068. Remixed the duct Hypercube-Evo fan duct for 70mm Hotend
I like vergienc's Precision Piezo mounts for the HEVO (prefer round mount points for the PP as the oval ones give me nothing but grief). Have been toying with the idea of an 'easily' exchangeable head'. using RJ45 cable
Do NOT connect your hotend heater as the wire is far to thin
Finally worked out how to have the board mounted at the back of the extruder, so have abandoned v1.x completely
Extruder is printer with supports, duct is printed without supports
v2.0
Reworked to move the fan from the back of the extruder to the front. That allowed me to move the RJ45 board to the back - which is what I wanted to do originality. The spacer part is in case you need to move the back solder points of the RJ45 board away from the nut/bolt hat holds the fan in place
The duct has some room to lengthen/shorten if your hotend is a different length to mine
Created a bltouch version with different lengths on adapter to accommodate print differences along with bltouch heights
November 1 2018
Remixed a cleaned up version of the BLtouch carriage and mount and a fan/duct. All 3 are what I am currently using on my HEVO. May go to serial or VGA cable ultimately, but htis is good for me now