1 / 8
Gopro Chinmount for Nolan N53 Helmet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A gopro mount for a Nolan N53 helmet. Can be attached with zip ties. Can be printed with minimal support.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 85
- Makes
- 1
- Views
- 761
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Description
This mount allows you to attach your GoPro securely to your Nolan N53 helmet using zip ties.
Printing
I used 3 wall perimeters and an gyroid infill of 25%
Can be printed standing up like this:

On my Printer you dont need support in the back only for the holes in the front.
Instaliation
- Print the part
- Remove the “sponge” in the front (should go easily in and out)
- Insert the zip ties(2.3mm x 98mm) as shown

- Feed the zip ties through the holes as marked

- Connect the zip ties in the back and tighten cpmpletly

- Cut the ends off and reinsert the “sponge”
- Go out and have some fun with your new gopromount
