Mini conveyor belt - 3D model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mini conveyor mechanism assembly made up of corner brackets, rollers, roller support and even a motor housing :)
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 131
- Makes
- 0
- Views
- 1,896
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- GNU General Public License v2.0
This conveyor mechanism is actuated by one N20 3mm DC 6V 200RPM Metal Gear motor.
The conveyor mechanism alone measures ~9.5cm width and ~9cm high. Including the housing for the motor increases the width to ~18cm. The length is up to the user. In my case the conveyor has a length of 11 cm. I also designed a crate that can be used to catch the parts as they are falling from the conveyor.
The housing for the motor has a section where a circuit board for the motor driver can be put. I have also provided a cable management channel for the wires running from the motor driver to the motor.
To assemble the conveyor mechanism the following parts are needed:
- 4 corner brackets
- 4 roller supports
- 2rollers
- 1 motor support
- 1 motor support cover
- At least 20 pairs of M3 bolts and nuts (if you plan to screw 2 out of 4 four holes)
- 1 crate
Note that I willingly omitted one roller support that is next to the motor.