Mini conveyor belt - 3D model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mini conveyor mechanism assembly made up of corner brackets, rollers, roller support and even a motor housing :)
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 1896
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- GNU General Public License v2.0
This conveyor mechanism is actuated by one N20 3mm DC 6V 200RPM Metal Gear motor.
The conveyor mechanism alone measures ~9.5cm width and ~9cm high. Including the housing for the motor increases the width to ~18cm. The length is up to the user. In my case the conveyor has a length of 11 cm. I also designed a crate that can be used to catch the parts as they are falling from the conveyor.
The housing for the motor has a section where a circuit board for the motor driver can be put. I have also provided a cable management channel for the wires running from the motor driver to the motor.
To assemble the conveyor mechanism the following parts are needed:
- 4 corner brackets
- 4 roller supports
- 2rollers
- 1 motor support
- 1 motor support cover
- At least 20 pairs of M3 bolts and nuts (if you plan to screw 2 out of 4 four holes)
- 1 crate
Note that I willingly omitted one roller support that is next to the motor.