Dipole antenna with SMA connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parts for creating a simple dipole antenna with copper pipes.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 84
- Makes
- 0
- Views
- 1,121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Parts needed to make a dipole antenna inspired by https://www.printables.com/model/235528-dipole-antenna. I have used 10 mm diameter copper pipe and cut to length using SWR meter (NanoVNA) according to the wanted frequency. From the wall mount to the antenna I have used a PVC pipe of 15 mm (white pipe in the pictures). To the base I have used a SMA connector from AliExpress. Note that you need to print 2x of the dipole_10mm_holder.stl.
To connect the copper pipes to the SMA connector, I first drilled a hole in the copper pipes and soldered a small copper wire. Then I inserted the copper pipes into the base (dipole_10mm.stl) and soldered it to the SMA connector. Can be a bit fiddly.