1 / 4
Rookery AIO detatch edition with shorter and original ducts — image 1
1 / 4

Rookery AIO detatch edition with shorter and original ducts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

main focus was to extend mount point to not have to remove part cooling fans, but also includes shorter ducts version.

Rating
0 / 5
Likes
5
Downloads
25
Makes
0
Views
271
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

As i often clogged my printer due to my classic stupidity and forgetting mind, i always had to remove the part cooling fans, then the shroud. So i modified it to be removeable without removing any fans!

Included the key Kanrog made on my request. The key he made had a 4 or 4.5mm hole which was too large for a m3 heat insert, so i modified it for a 3mm hole instead to properly have the m3 heat insert grip around.

And ducts were too short for my usage as the heatblock and heatbreak are installed as close together as i could get them, the ducts would be closer to the bed than the nozzle. So i moved them further up to make sure they weren't in the way this time.

Used blender to adjust. 

“2 meter shorter ducts”
“6 meter" longer ”key" connector, and “6 meter” hotend cooler fan extrusion to not have distance from hotend changed.

Blender is just weird that way with STL's. 

Included OG “rook” intended top, and “rookless” top

 

If you like what i do, please consider throwing a few breadcrumbs my way :)
https://ko-fi.com/duckers

Tags