Y-Splitter using PushFit for M10x1 and 1/2x18
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified so it can take 2 different pushfits, M10x1 thread and 1/2x18 (18TPI) (PC6-02 e.g.)
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 42
- Makes
- 1
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Modified to allow both two different pushfits (e.g. I have 10x1 for 4mm and ½" 18TPI for 6mm PTFE tubes). 4mm PTFE tube comes from AMS and 6mm PTFE tube comes from dry box. If you want to use both 4mm PTFE tubes you can use original part ( https://www.printables.com/model/493962-y-splitter-m10x1-pushfit-magnet ) you can also find pushfits 10x1 for both 4 and 6mm but imperial 1/2x18 are more common for 6mm
onshape source: https://cad.onshape.com/documents/600c90c3d36cc0407fdae2c5/w/e9c3db9b6051220eb8c91994/e/e5303f130d727c72174f3d49?renderMode=0&uiState=647583d563b18e1702b9f2d8