1 / 5
TAZ 5 1.75mm Conversion Using e3d v6
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1.75mm extruder conversion for LulzBot Taz 5 using generic e3dv6 hotend parts.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 34
- Makes
- 0
- Views
- 407
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
1.75mm extruder conversion for LulzBot Taz 5 using generic e3dv6 hotend parts.
You will need the following to assemble the hotend
- A generic e3d v6 hotend. Clones are available online for around $20, but make sure to get one with a 24v heater cartridge
- Two M3x20 bolts, two M3x10 bolts, and four M3 nuts (for DaVinci2000's part cooler shroud)
- A 5015 "squirrel cage" blower fan (for the part cooler)
- Some short wires, about 22AWG
- Pin headers
- a 4-pin header for the stepper, a 2-pin header for the part cooler fan, and a 2x8 header for the TAZ hotend connector - I used two smaller headers side-by-side, a 2x3 for the thermistor and a 2x5 for everything else
- The old hotend/extruder from your TAZ 5
- A generic bowden extruder
- Some bowden tube (58mm long)
Assembly Instructions
Full instructions in github repository.