1 / 2
EZDmag 25 dart drum style nerf magazine — image 1
1 / 2

EZDmag 25 dart drum style nerf magazine

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A remix of the Thanhlon d-mag from thingiverse.

Rating
5 / 5
Likes
124
Downloads
319
Makes
1
Views
5,110
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a EZ load remix of Thanhlon nerf drum. It uses 2 drum springs, A few blaster screws, and a foot or so of fine string /fishing line.

Tie string to bottom of follower and run it through the small hole in the barrel. Assemble the mag and springs then pull the string and tie a knot that will fit into the large hole in the barrel. 

You will want the string short enough that it keeps a little tension on the springs to prevent the follower from being shot out of the top if you let go under tension with no darts in mag.

You will also need to sand the inside of the mag, I went to 400grit and sanded VERY smooth.

Loads 25 darts no problem.

If you use full auto you want NEW DARTS and SAND, SAND, And then SAND SOME MORE.

NOT ORIENTED FOR PRINTING

Tags