UV Lamp Pan/Tilt Mount for 2020 Rail
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to hold one of these: https://www.amazon.com/gp/product/B07QJZ6N9R/ I ordered this lamp, which turned out to…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 243
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Designed to hold one of these: https://www.amazon.com/gp/product/B07QJZ6N9R/
I ordered this lamp, which turned out to be very powerful and great for illumination when printing with glow in the dark filament. So I designed a mount for it to attach to the rails of my Ender. You can use this design on any 2020 rail.
Print instructions
Print in something strong like nylon or PC, or failing that, you can get away with PETG or ABS. After printing, take the factory installed mount off the UV lamp and use a slightly longer screw to attach it to the armature. Then attach the armature to the turret using the printed thumbscrew. Twist the turret to break its internal supports and allow its azimuth motion. The altitude motion is controlled by tightening the printed screw.
The diffuser should be printed in clear PETG. Test the filament first to make sure it will transmit the UV, as not all clear plastics do.